Quick Start

MC110 PDI Builder is the main tool for setting all configurable parameters of the Veronte Motor Controller MC110.

Here the user can configure, tune and define the motor, control systems and sensors to be used together with the ESC.

Once MC110 has been detected on Veronte Link, download and install MC110 PDI Builder.

System Requirements

Before executing this software, users should check the following sections with the minimum and recommended PC hardware requirements.

Minimum requirements

• CPU: Intel Core i5-8365UE
• RAM: 8 GB DDR4
• STO: 256 GB SSD

Recommended requirements

• CPU: 12th Gen Intel(R) Core(TM) i7-12700H 14 cores up to 4,70 GHz
• RAM: 32 GB
• STO: 1 TB SSD M.2 NVMe PCIe

Download and Installation

MC110 PDI Builder software is available in the Veronte Toolbox platform. From there, users can download and install the application. For more information, please refer to the Veronte Toolbox user manual.

A personal account is required to access Veronte Toolbox; create a Ticket in the user's Joint Collaboration Framework and the support team will create it for you.